How to Utilize PowerOnTheGo Accurately and Conveniently?-SETEC POWER

How to Utilize PowerOnTheGo Accurately and Conveniently?

An emergency energy storage system is devised to fulfill your energy requirements during emergencies. PowerOnTheGo not only charges electric vehicles but also meets all kinds of electricity demands, whether it's the temporary electricity needs in a home or factory during emergencies, or sustainable renewable energy that can be recycled and sent back to the grid.
Having chosen PowerOnTheGo, it's important to learn how to use it to get out of your energy predicament.

Jan 16, 2025

Charge Your Electric Car

PowerOnTheGo was initially developed to supply electricity to the owner of an electric vehicle as a power delivery service. Its main function is to charge electric vehicles, so this function is the most significant demand for usage.

Equip and select the adapter compatible with the electric vehicle, connect it directly to the electric vehicle, and charge it with a click on the 10-inch touch screen. As long as the battery has power, it can carry out the charging operation, and the entire charging process of the electric vehicle is completed.

备用.jpg

Recharge PowerOnTheGo with Adapter

PowerOnTheGo can be recharged using an adapter that typically employs both DC and AC. Go to the charging station and use a compatible charging adapter to charge the battery directly with DC and AC.

It is worth noting that the compatible interfaces (CCS1 / CCS2 / CHAdeMO / GB/T / NACS) are customizable, allowing you to choose the one that suits your needs.

充电桩分流

Optimizing Electricity Costs by Shifting Consumption During Peak Load

The cost of electricity is usually determined by the total electricity demand within a given period, so electricity rates fluctuate. By storing power when the electricity cost is low and using it when the electricity cost is high, it is possible to consume power at a lower cost during peak electricity costs. The application effect of small-capacity batteries is not obvious, so PowerOnTheGo can exert a significant advantage in this respect.

When the electricity cost is low, use a special plug at home or in the factory to connect the Power to AC Power Input, turn on AC Charge switch, and then select the switch of different powers and set the switch to complete the power storage in PowerOnTheGo.

When using electricity for life or production, you can utilize PowerOnTheGo for energy emergencies if you encounter temporary power outages, peak electricity consumption, and other emergency situations. Connect its interface with a cable, which is used to access the distribution box and set Discharge switch to ON. Complete the entire power supply process, and the home or factory will be able to power successfully in an emergency.

Recharge via the Grid

Recharging the battery of the PowerOnTheGo using electricity from the grid is similar to recharging in a home or factory. AC Power Input needs to be connected to the grid cable, and AC Charge should be set to ON, which is a straightforward matter.

Feed Excess Power Back to the Grid

In the case of excess power, you can even opt to send it back to the grid, which PowerOnTheGo is capable of doing. A grid-connected inverter is almost mandatory, converting DC into AC utilized by the grid. It is also necessary to understand the electrical energy standards employed by the local grid (such as electrical energy voltage, electrical energy frequency, etc.) to avoid damage to the grid and user equipment due to voltage instability and other factors.